Learn Shopping Mall & Office Lighting Design System

Description

1.Luminaires Selection For Rooms

    Luminaires selection depends on the various factor like room size and area and lux value, polar curve , color temperature in Kelvin, IP ratings , so we will learn all these terms then we will go into the next step .

2. Fixture Selection

    In this section we learn all three things that is required for lighting system like Lamps , Distributors or Diffusers and about     the enclosure . And each part has many different types and categories depending on the application.

3. Calculation Of Loads

   After selection the luminaires, will show you the exact procedure to find out the power those lams are going to consume, and depending on that next steps will be carried out.

4. Selection of Cable, Circuit Breaker and Panels

   Selection of these materials is not a simple and easy things but through out the lessons we will make that happen.

5. Wiring Of Luminaries

    After every equipments is selected we will make a circuit and check.

6. Make the circuit in AutoCad electrical

    We will use AutoCad 2021 version.

7. Learn to make 3D drawing from 2D sketch

8. Use of DiaLux Software to design & visualize office lighting system

    This is the most important part of this whole course.

TAKE THIS COURSE