Design the High Rise Buildings ( Level 2 )

Structural Engineering Software ( ETABS&SAFE ), from point of view of skyscrapers design engineer .

Ratings 4.32 / 5.00

Design the High Rise Buildings ( Level 2 )

What You Will Learn!

In this course the engineers will learn how to use the technical software with required codes to achieve the optimal and safer design to the high rise buildings .
To be structural designer
This course is a continuation of Design The High Rise Buildings Series ( Level 1 ,2 and 3 )

Description

In This level you will learn how to revise your model and checking a lot of effected factors in structural design .Those factors will be mentioned below :

Part 1 ( ETABS Model )

Check Load Combinations .
Check Static Seismic Forces AS Per UBC97.
Check Dynamic Seismic Forces AS Per UBC97.
Check P-Delta Analysis
Check the Mass Source.
Check The Time Period.
Check The Mode Shapes.
Check The Wind Tunnel .
Check The Base Shear As Per UBC97
Check Displacement Per Wind As Per ASCE7-16
Check The Overturning Moment.
Check Seismic Drift As Per UBC97
Design All Members Using ACI318M-14

Part 2 ( SAFE Model )

Check The Materials, Slabs thickness, Rebars and loads
Check Load Combinations As Per ACI318M-14
Draw the strips for designing .
Check Automatic Mesh.
Check the Stiff Areas.
Check The Deflection As Per ACI318M-14
Design The Slab AS Per ACI318M-14
Check The Punching AS Per ACI318M-14

At the end you will have the required information to start designing your first tower or skyscraper building with the acceptable values from designed codes.