Maxsurf

Design and Engineering

Ratings 4.69 / 5.00
Maxsurf

What You Will Learn!

  • You are now a professional design engineer and hull designer. You have full knowledge of the design process and calculations in all its details.
  • With the knowledge and experience you have gained here, you can have the chance to work in the best companies of the world in this field.
  • You can create your own design, make the calculations and provide the manufacture.
  • You can design and calculate Yacht-Sailing-Freighter-Catamaran-Triman and all types of boats.
  • When you enroll in our trainings, you will have the opportunity to meet dozens of engineers and designers from different countries around the world.

Description

Halil Necati KARACA Respectfully Presents,


      Welcome to our training, published worldwide for the first time on an online platform.


      Maxsurf is a software for hull modeling and calculations of boats. We recommend that you do not think that you can only learn Maxsurf with this training. Because you will learn so much more. Maxsurf consists packaged software designed to perform different operations.

      Modeler, Stability, Resistance, Structure, VPP (Sail) and Motions modules are explained.

      The new version of Maxsurf is used throughout the training.


      -During the training, Maxsurf software and all commands in the software were explained one by one.

      -After being shown everything the software could do, a Mega Yacht hull was designed from zero. An optimum hull has been created by taking all parameters into consideration.

      -Everything that needs to be done to obtain a perfect boat hull is explained.

      -The relationship between the customer and the design office was simulated in the training. Mega Yacht is completely determined according to the customer's wishes. All limitations and values were determined by creating a Spect Table at the preliminary design stage.

      -Resistance and range calculations of the boat have been made. Tank capacities were decided according to these calculations.

      -Preliminary stability calculations have been made. All calculations that can be made with the software are explained both theoretically and practically.

      -With the help of the data obtained, revisions were made and the boat was made ready for superstructure design.

      -In Maxsurf, weight and center of gravity information is needed to calculate the final stability. At this stage, the process continues with Rhino training.

      -In the Rhino course, all design, construction, interior modeling and weight calculation issues are explained in detail and modeling procedures are also carried out.

      -The positions of the tanks were decided with the help of the weight information obtained in the Rhino traning. Then, Final Stability calculations were made. The calculations are listed in the Final Stability Booklet at a level that can be sent to Lloyd Register for approval.

      -The subject of Motions is explained using the same Mega Yacht. All the details are mentioned and the results are interpreted.

      -With the help of the Structure Module, an effort has been made to model the same construction modeled in Rhino, and all the operations that the software can perform are explained.

      -The sail of the sailboat used in our VPP module Scantling course is designed and explained. All operations that the software can perform are mentioned.


      All model files have been uploaded to the resources section at the end of the lessons. In this way, it is aimed that you progress simultaneously with the training and reach 100% efficiency.


      An attempt has been made to explain everything as simply as possible. Even if you have no knowledge in the fields mentioned, you can learn all of them. When you complete the training, you will be able to design and manufacture your own boats on your own. This will help you be among the pioneers in this field.


      Maxsurf is an analysis program and the important thing in analysis programs is to interpret the analysis rather than making the analysis. This requires sufficient knowledge and experience. The important thing is not to learn the software. Learning software alone will not save you any money. A high school student can also perform analysis using the software. That's why the results obtained from the software are explained meticulously in this training. The important thing is to abandon the programmer way of thinking and focus on the result with an engineering approach. Only then will you realize that you can actually use Maxsurf.


      Maxsurf is not a program that can be used in all design stages. For this reason, the same boat prepared during Maxsurf training was also used in Rhino training. With the help of Rhino software, you will be able to learn all the design and technical details that cannot be implemented with Maxsurf software.


      Thanks to these two trainings, you will be able to add professionalism to your professionalism in both engineering and design and be one of the best in this world.

Who Should Attend!

  • You can be an engineer, designer or even a middle school student for this course. If you are interested in design or engineering, I believe it will be a unique course experience for you.
  • It is suitable for those who are interested in Mechanical and Industrial Engineering, especially in the fields of Shipbuilding, Marine and Engineering, as well as Architects, Interior Architects and Design.
  • It is also suitable for people who have completed their studentship and have reached a certain professional level.
  • It is suitable for anyone who wants to improve themselves in this field.
  • It is suitable for anyone who wants to develop themselves in the fields of captaincy and yacht.

TAKE THIS COURSE

Tags

  • Rhino 3D
  • Naval Architecture and Marine Engineering

Subscribers

104

Lectures

57

TAKE THIS COURSE



Related Courses